Structural Ipe Deck Tiles by Eco Arbor Designs
deck tiles by Eco decks


Structural Porcelain Deck Tiles for raised floor/pedestal applications

Pedestal and Deck Tile Brochure Download Center (click to download the pdf file)


Porcelain Structural Deck Tile Brochure and spec sheet download


Elmich Spirapave Low profile adjustable Brochure


Elmich Telescoping Pedestal Brochure









Versatile, hard wearing, stain resistant, frost resistant, structural porcelain pavers for outdoor roof decks and balcony surfaces.

ECO DECK Porcelain Structural Deck tiles may earn you LEED point credits in all 5 catagories.


-Below is a brief diagram of the typical installation over roof membrane or other hard surfaces.

-Available in unique stone and wood look finishes including a simulated joint to match our genuine hardwood tiles.

Model: ECO DECK Solid 3/4" thick porcleain slab tile 9lbs per sq ft 36 lbs per tile

Imported from Italy from the finest Italian porcelain tile makers, these tiles will add distinction and low maintenance for your outdoor spaces. Available in many colors and styles including a genuine Ipe deck wood look. Single slab, load bearing porcelain stoneware pavers feature exceptional durability, stain resistance, fire resistance, scratch resistance and frost resistance. The result is a deck surface that requires no maintenance or special care. These 2x2 strructural deck tiles can be used to create a luxury elevated floor in any residential or commerical application.

Ideal for both large residential and high traffic commercial applications, ECO DECK porcelain pavers are specifically designed for use with adjustable height pedestals as a cost effective means of creating elegant, perfectly horizontal, load bearing decks over sloping, uneven, cracked or unsightly concrete surfaces or rooftops. Urban patios and roof decks can now enjoy the look of concrete, stone or wood without the weight and the hassle.

Each paver measures 23 3/8" x 23 3/8" (600mm x 600mm) with a thickness of 3/4" (20mm).

Porcelain pavers offer exceptional flexibility in design applications as they can be installed:

on compacted sand or gravel
over hard, level surfaces such as concrete
with adjustable height pedestals for elevated decks


- fireproof
-superior strength and impact resistance
-each tile capable of supporting over 2000lb
-more cost effective than grating or grid structures for elevated decks
-resistant to damage by frost, snow, ice and heat (-40°F - 210°F)
-quick and easy to install
-stain chemical and salt resistant
-fade resistant
-slip resistant and quick draining
-easy to clean and maintain
-lighter and easier to handle than concrete blocks
-removable and reusable

Detailed specifications, color range and installation guidelines can be seen on the respective web pages or by downloading the ECO Deck Porcelain deck tile brochure on the left side of this page. Color Chart below for all available finishes. Most colors are in stock along with a few that are not shown including our simulated wood series. 60X60cm tiles require a pedestal on all 4 corners. 60X120 cm tiles require the same number of pedestals however the center pedestals will install with only parallel spacer tabs. A center pedestal is suggested for larger tiles

Use with Elmich Adjustable Pedestals or any approved pedestal system



Call us for samples and more information 866 326 4418